The cannons out in the weather.

As promised, here are some pictures of the armours I took back in 2005, when they were out in front of the churches in Valetta and Vittoriosa. These cannons had been pulled out of the water some time since the second world war. I expect a Maltese reader can straighten me out on the provenance of these cannons!

I remember it was raining cats and dogs that day! You can see all the water on the cannon in the above pictures.

This is worth looking at more closely.

Imagine such beautiful examples of the founders art being used to create a weapon of destruction!

Measuring the drawings 2005

Back in 2005, I measured the drawings for the armour below. The armour is not bright and shiny...sorry! As you can see, it has been preserved with axel grease which is pretty solid and soapy by now. From the above measurements, I went on to build the breastplate below, as well as a pretty backplate to go with it.

The armour is just big enough for a 14 year old. It is hard to imagine that at one time, it fit a fighting man.

Malta Breast Plate

The Armour I plan to give to people of Malta is finally done! And not a moment too soon! It is a partial breast and back plate...I never DID get the belly plates and faulds done. But hey, can't have everything! Here is the link to the beginning of this job!

http://southtowerarmouringguild.blogspot.com/

You have to scroll down a bit...This first picture shows the side bars in the fully out position.

And here they are in the mostly collapsed position. There is a sliding rivet behind, where you can't see it, just like in the original. You also get a really good closeup of the fancy file work along the edge. Not all of the Knights (of St. John) had armour this fancy...often the edges did not have the file work.

Many people have wondered, even in scholarly books, how the shoulder pieces actually stay out. It makes sense that when you bend your arm to strike a blow, the side piece will sink in on its sliding rivet...so what brings it back out again? Some have speculated that it was the way the straps were mounted, but we have found that often the straps are mounted on the inside, big breastplate. There is a hole there to indicate that that was done once. Well, having made one, I finally found the answer....there is a spring action at the bottom pivot rivet that keeps it sprung out.

Three quarter views of this armour. This one is the same as the last one, but brightened up a bit.

Full front view...the "spring action" is obvious when you see it in full front. The main breast plate acts as a spring to hold the side pieces in place. You can push them down, but it causes a little bit of flex in the breastplate, resulting in the armour pulling back out into place when the sword blow is done.

You will note that even with the side plates, the armour is still pretty restrictive. You cannot move both arms forward at the same time!

A nice side view showing the file work at the bottom pivot rivet.

And my very pretty roped top edge. Note that it is a full half an inch in the centre, but only a quarter inch at the edges.

I had to drill out all the rivets to do the fancy file work on the edges, but all in all, I think it was worth it. The end result looks great when paired up with the backplate. Those that have an interest about how ALL this armour was made are welcome to peruse my archives...I documented the whole thing!